top of page
7_Apollo series_Audiophile XLR Connecting Cable_工作區域 1.jpg

apollo xlr connecting CABLE


For most of the high-end audiophile systems, we prefer to use the XLR instead of the RCA, because the XLR provides 4V while the RCA provides 2V to transfer the audio signal. T-Adler engineers considers that it is the lower drive level series, we need to protect the signal flow without any interference effects.

XLR Cables are "filtering out, reducing the overall noise level. This works because the audio signal is being carried by the positive and the negative wires which have opposite polarities.


T-Adler uses the oxygen-free high thermal conductivity copper ( OFHC ) which is the highest conductivity material for signal path. Our conductor is the C10100 type with 99.99% pure copper with 0.0005% oxygen content.

T-Adler takes out all the impurity and add the silver Ag into the chemical specification.

The conductors are manufactured with Cryogenics process to raise up the purity content to 99.99% With so small a content of extraneous elements, the inherent properties of elemental copper are brought forth to a high degree. These characteristics are high ductility as well as high electrical and thermal conductivity.                                                   

T-Adler uses 64 x 0.1mm copper strands


It is a very high conductivity and high RF rejection cable.

We are totally using 7 conductors, 4 as the positive and 3 as the negative with one ground connection.

T-Adler specially developed the new David gold plated XLR terminal

All the conductors are twisted into one direction to balance all the RF-rejection.

It is a very flexible cable.


T-Adler XLR cables are used in audio systems with XLR connections. The major is used in the true balanced connections between the sources, D/A, pre-amplifiers and the power amplifiers.


1.8 meter length

Weight : 870 g

Diameter : 20 mm

Conductor resistance : Less than 39 ohm per one kilometer max.

Shielding resistance : less than 28 ohm

Conductor Capacitance : Less than 50 nF per one kilometer

Capacitor shield : less than 101 nF per one kilometer

Power rating : low voltage

Temperature : -30 to + 70C

Color of the cable : black

Color of the metal holder : black

Limited number : no list

bottom of page